WPC cross fence
WPC cross fence - without painting, oiling
WPC cross fence - 15 years warranty on modern and durable boards
Partition wall with horizontal WoodCore boards
For horizontal partition walls, 3 different WoodCore board profiles are available:
– RHOMBUS board 67
– solid board 128
- Board - 150
Below are three examples of partition walls with different board profiles. The first image shows a partition wall made with the RHOMBUS board 67 profile, 6.7 cm wide and 5.8 m long. The second option shows a partition wall made with solid board 128, 12.8 cm wide and 2.2 m long. The third option shows a partition wall made with board 150, 15 cm wide and available in lengths of 4 m or 2.2 m.
The maximum spacing between posts is 145 cm. L-brackets must be installed on the left and right side of the posts, and the rhombus board is fixed through the brackets. The screws are not visible from the outside.
The maximum spacing between posts is 110 cm. The fixing is visible from the outside. Screws are fixed through the board into the structure.
The maximum spacing between posts is 130 cm. The fixing is visible from the outside. Screws are fixed through the board into the structure.
Partition wall installation, RHOMBUS board 67 profile
The rhombus profile is 6.7 cm wide and 5.8 m long, and can be cut to the required length. Each post must have an L-bracket on the left and right side for fixing the rhombus board. The rhombus board is fixed from the rear side with stainless-steel screws through the bracket into the aluminium tube in the centre of the profile. The screw is not visible from the outside because the profile has an aluminium tube in the centre. The maximum distance between posts with L-brackets is 145 cm. This spacing is only possible if the L-bracket is installed on both the left and right side of the post. In the composite material, the hole must always be larger than the screw diameter to allow for material expansion.
Example: for a 3.9 mm self-drilling screw, first drill a 3.2 mm hole through the rhombus profile and aluminium, then enlarge the hole in the rhombus profile to 4.2–4.5 mm.
IMPORTANT: Installation of the rhombus board without an aluminium tube in the centre of the profile is not possible. The rhombus profile can only be purchased together with the aluminium tube, which is already included in the price of the rhombus board.
Partition wall installation, board 150 profile
Terrassendielen mit einer Breite von 15 cm und einer Länge von 4 m oder 2,2 m können auf die gewünschte Länge zugeschnitten werden. Die Dielen werden von vorne mit Schrauben durch die Diele in die Konstruktion an den Trägern befestigt. Die Schrauben sind auf der Vorderseite daher sichtbar. Bei der Montage ist Vorbohren erforderlich. Das Bohrloch muss 1 mm größer als der Schraubendurchmesser sein. Die Verschraubung erfolgt direkt in der Mitte der Diele, dort, wo sich die Rippe im Profil befindet. Die Pfosten für die horizontale Montage der Dielen dürfen maximal 133 – 140 cm voneinander entfernt sein.
Installation of the barrier - profile PLATE - 128
Solid boards 128 mm wide and 2.2 m long can be cut to any length. The boards are screwed to the substructure from the front – through the board into the structure – so the screws are visible on the face. Pre-drilling is required. The hole must be 1 mm larger than the screw diameter. The screws are placed in the centre of the board where the internal rib is. The hole must be 1 mm larger than the bolt dimension. The screws are directly in the middle of the board. The posts for the horizontal positioning of the boards shall be at a maximum distance of 110 cm.
Storage
Before installation, WoodCore WPC boards must be stored in a dry and well-ventilated place. The storage surface must be flat and clean. The boards must be fully supported along their length and width. In the case of improper storage, complaints cannot be accepted.
Send us an enquiry
Request a free quotation. Send us the dimensions of your partition wall or carport enclosure. To prepare a quotation, we need the length and height. Please also let us know which type of partition you would like and what spacing between the boards you prefer. You can send the dimensions to info@roksal.com. If possible, please also send us a floor plan and photos.
The fastest way is to send us your enquiry using the form below:
Advantages of WPC cross fencing
Different boards for the WPC transverse partition wall:
PROFILE RHOMBUS - 67
WoodCore WPC ROMB board for partition wall with aluminium tube in the centre of the diamond.
Dimensions: 67 x 26 x 5800 mm
KUBO FULL BOARD - 128
WoodCore WPC solid board - 128 for partition wall with visible screwing.
Dimensions: 128 x 16.5 x 2200 mm
CLASSIC boards
RUSTIK boards
KUBO PLATE - 150
WoodCore WPC Board - 150 for partition wall with visible screwing.
Dimensions: 150 x 25 x 4000 mm
End cap for the 150 board
Colour shades
Colour shades for profile ROMB DESKA - 67:
For the rhombus profile you can choose from the seven colours below:
Colour shades - profile POLNA DESKA - 128:
This profile can be used for partition walls in the transverse direction. Choose from the six colours below:
Colour shades - profile DESKA - 150:
You can choose between seven colour shades and three surface finishes. One side of the board has narrow ribs, the other has wide ribs. Only the Rustic boards are completely smooth on one side and finely ribbed on the other.
Storage
Before installation, WoodCore WPC boards must be stored in a dry and well-ventilated place. The storage base should be flat and clean. The boards must be fully supported along their length and width. In case of improper storage, complaints cannot be accepted.
Send us an enquiry
Request a free quotation. Send us the dimensions of your partition wall or carport enclosure. To prepare a quotation, we need the length and height. Please also let us know which type of partition you would like and what spacing between the boards you prefer. You can send the dimensions to info@roksal.com. If possible, please also send us a floor plan and photos.
The fastest way is to send us your enquiry using the form below:
Made of bamboo fibre and HDPE plastic, WPC boards provide stability and resistance even when the fence is erected upright. With a 15-year warranty and minimal maintenance, WPC boards are a long-term and durable solution.
You can also read more about the material at WPC - Wikipedia
