WPC facade boards, 15-year guarantee

WPC facade boards - durable facade cladding without painting | Roksal

WoodCore WPC facade boards

Do you want a façade that doesn't need to be varnished and painted to keep its original look? WoodCore WPC façade boards are composed of bamboo wood and HDPE plastic and, because they are a wood composite, they do not need to be painted or varnished. WPC boards do not split and do not disintegrate. And we offer a 15-year warranty on the wood composite. For a uniform appearance, we recommend periodic cleaning, especially on parts not exposed to rain.

WoodCore WPC wood composite façade installation

Rhombus profile

For the façade, the insulation is first made, and a 4 cm thick, 6 cm wide larch batten is screwed to it at 70 - 80 cm intervals. A 2,6 cm thick rhombus profile + 0,5 cm thick fixing system shall be fixed to it. The total thickness on the insulation is 7,1 cm, which you must take into account to ensure it is in the same plane with the rest of the façade.

If the insulation is in the same plane as the WoodCore exterior, the insulation must be thinned by 7,5 cm or more at this point. A 2 mm thick alu sheet shall be screwed around the windows before the insulation.

Installation is carried out in the following order:
- First, a mounting plate is attached to the back of the profile
- The first façade batten shall be fixed below and above, each subsequent batten shall be hooked behind the previous one and fixed above only. This way, the façade is flexible on one side and can shrink and stretch in the face of weather changes, while always remaining straight.

The hole in the composite material is always larger than the screw due to stretching.
Example: For a Knipping 3.9 screw, drill a 3.2 mm hole through the rhombus profile and the aluminium, then enlarge the hole in the rhombus profile to 4.2–4.5 mm.

It is NOT possible to install the rhombus profile without the aluminium tube (in the centre of the profile). The rhombus profile can only be purchased together with the aluminium tube, which is already included in the price of the rhombus profile.

Kubo

Can be mounted to a width of 4.2cm or 8cm. The substrate on which the slats are mounted must be painted black.

Mounted on horizontally fixed powder-coated aluminium tubes 20×60×2 mm.

The appearance of the façade (the arrangement of the boards) depends on the creative idea of the individual.

Solid board - 100

Solid boards can be installed horizontally or vertically on prepared insulation, which must be finished with reinforcing mesh and adhesive, and painted black. Larch battens measuring 4 × 7 cm are fixed onto the insulation at 70–80 cm intervals, which provides façade ventilation. They are screwed into the brickwork. For a vertical board layout, additional horizontal battens 2 × 7 cm are installed at a spacing of up to 50 cm, forming a grid. If you want the decorative section (with solid boards) to be flush with the standard façade, the insulation in that area must be reduced by at least 6 cm. In that case, insulation with the same or a similar thermal performance is used. Around windows and doors, a black metal sheet 2 mm thick is installed, fixed to a wooden substructure, onto which the boards are then fixed. The total thickness of this section is approx. 1.5–2 cm. The solid boards are fixed from the front with visible RF shiny screws. Finishing details can be done with solid boards (visible fixing) or other solutions as desired.

Elements for WoodCore WPC façade:

RHOMBUS PROFILE
WoodCore WPC profile rhombus for façade or fence, rhombus profile with an aluminium tube in the centre of the profile.

Dimensions: 67 x 26 x 5800 mm

FACADE CLIP
WoodCore WPC ROMB board for timber
battens shall be fixed with a façade clip.

KUBO PROFILE
WoodCore WPC KUBO profile for facade with aluminium tube (raw or anodised) in the centre

Dimension: 80 x 42 x 5800 mm

80 x 42 x 5000 mm

(Amazon Wood and Rustic Walnut only)

Inside aluminium tube (left to right): 20×60×2 mm, 25×25×2 mm, 20×20×2 mm.
The choice affects the price and span of the structure

KUBO SOLID BOARD - 100
WoodCore WPC Board - 100 for façade with visible screwing.

Dimension: 100 x 12 x 5800 mm

Colour shades for PROFILE ROMB

Choose from seven colour shades:

Colour shades for PROFILE KUBO

Choose from four colour shades:

Colour shades for POLNA DESKA-100 profile:

These boards are suitable only for vertical fences. For the solid profile you can choose from the eight colours below:

Storage

Before installation, WoodCore WPC boards must be stored in a dry and well-ventilated place. The storage surface must be flat and clean. The boards must be fully supported along their length and width. In the case of improper storage, complaints cannot be accepted.

Send us an enquiry

Get your free offer! Let us know the dimensions of your façade or send us the plans of the façade with the part you want to clad marked. You can send your enquiry to info@roksal.com or just use the form below:

WoodCore WPC boards for ROMB façade

Advantages of WPC facade boards

WPC facade boards combine the warmth of natural-looking wood with the durability of a composite material. Since they do not need painting or oiling, maintenance costs are minimal and the façade remains attractive for many years.

Why choose WPC boards for facade cladding

Facade cladding made of WPC boards protects your home from moisture, sun and temperature fluctuations. The surface does not peel or crack, so the appearance of the façade is always uniform. Several colour shades are available to adapt to different architectural styles.
See examples of implementations in our WPC façade gallery.
More on WPC material.