WPC cross fence
WPC cross fence - without painting, oiling
WPC cross fence - 15 years warranty on modern and durable boards
Partition wall with transverse Woodcore boards
For transverse partition walls, we have 3 different profiles of Woodcore boards:
- Rhombus profile - 67
- Solid board - 128
- Board - 150
Three examples of a partition wall with different profiles are shown below. The ROMB boards on the left are 6.7 cm wide, 5.8 m long. The middle picture shows a barrier with a profile of FULL PLATE-128, 12.8 cm wide, 2.2 m long. On the far right of the picture is a barrier made of TERRACE BOARDS, 15 cm wide, 4 m or 2.2 m long.
The maximum spacing between posts is 145 cm. The left and right corners where the rhombus profile is fixed must be mounted on the posts. The fixing is not visible from the front.
The maximum spacing between posts is 110 cm. The fixing is visible from the front. The screws go through the board into the substructure.
The maximum spacing between posts is 130 cm. The fixing is visible from the front. The screws go through the board into the substructure.
Installation of the partition wall - ROMB PLATE profile - 67
The rhombus profile, 6.7 cm wide and 5.8 m long, can be cut to any length. Each post must have an L-bracket on the left and right side to fix the rhombus profile. It is fastened with stainless-steel screws through the bracket into the aluminium tube in the centre of the profile, from the back side. The fixing is not visible from the front thanks to the aluminium tube inside the profile. The maximum spacing between posts with L-brackets is 145 cm and is only possible when the brackets are mounted on both sides of every post. In composite material, the hole must always be larger than the screw diameter to allow for expansion.
Example: for a 3.9 mm stainless-steel screw, drill a 3.2 mm hole into the aluminium tube, then enlarge the hole in the rhombus profile to 4.2–4.5 mm.
WARNING: installation of the rhombus profile without the aluminium tube in the centre is NOT possible! Therefore, the rhombus profile cannot be purchased without the aluminium tube.
Installation of the barrier - profile PLATE - 150
Board 150 is 15 cm wide and 4.0 or 2.2 m long can be cut to any length. The boards are screwed to the substructure from the front – through the board into the structure – so the screws are visible on the face. Pre-drilling is required. The hole must be 1 mm larger than the screw diameter. The screws are placed in the centre of the board where the internal rib is. For horizontal installation, the posts must be spaced a maximum of 133–140 cm apart.
Installation of the barrier - profile PLATE - 128
Solid boards 128 mm wide and 2.2 m long can be cut to any length. The boards are screwed to the substructure from the front – through the board into the structure – so the screws are visible on the face. Pre-drilling is required. The hole must be 1 mm larger than the screw diameter. The screws are placed in the centre of the board where the internal rib is. The hole must be 1 mm larger than the bolt dimension. The screws are directly in the middle of the board. The posts for the horizontal positioning of the boards shall be at a maximum distance of 110 cm.
Storage
Before installation, WoodCore WPC boards must be stored in a dry and well-ventilated place. The storage surface must be flat and clean. The boards must be fully supported along their length and width. In the case of improper storage, complaints cannot be accepted.
Send us an enquiry
Get your free offer! Let us know the dimensions of your partition or canopy. We need the length and height to make a quotation. In addition, please let us know which type of partition you would like to have and what the spacing would be. Please let us know the dimensions of your partition at info@roksal.com. If possible, you can also provide us with a floor plan and pictures.
The fastest way is to send your inquiry directly via the form at the button below:
Advantages of WPC cross fencing
Different boards for the WPC transverse partition wall:
PROFILE RHOMBUS - 67
WoodCore WPC ROMB board for partition wall with aluminium tube in the centre of the diamond.
Dimensions: 67 x 26 x 5800 mm
KUBO FULL BOARD - 128
WoodCore WPC solid board - 128 for partition wall with visible screwing.
Dimensions: 128 x 16.5 x 2200 mm
CLASSIC boards
RUSTIK boards
KUBO PLATE - 150
WoodCore WPC Board - 150 for partition wall with visible screwing.
Dimensions: 150 x 25 x 4000 mm
End cap for the 150 board
Colour shades
Colour shades for profile ROMB DESKA - 67:
For the rhombus profile you can choose from the seven colours below:
Colour shades - profile POLNA DESKA - 128:
This profile can be used for partition walls in the transverse direction. Choose from the six colours below:
Colour shades - profile DESKA - 150:
You can choose between seven colour shades and three surface finishes. One side of the board has narrow ribs, the other has wide ribs. Only the Rustic boards are completely smooth on one side and finely ribbed on the other.
Storage
Before installation, WoodCore WPC boards must be stored in a dry and well-ventilated place. The storage base should be flat and clean. The boards must be fully supported along their length and width. In case of improper storage, complaints cannot be accepted.
Send us an enquiry
Get your free offer! Let us know the dimensions of your partition or canopy. We need the length and height to make a quotation. In addition, please let us know which type of partition you would like to have and what the spacing would be. Please let us know the dimensions of your partition at info@roksal.com. If possible, you can also provide us with a floor plan and pictures.
The fastest way is to send your inquiry directly via the form at the button below:
Made of bamboo fibre and HDPE plastic, WPC boards provide stability and resistance even when the fence is erected upright. With a 15-year warranty and minimal maintenance, WPC boards are a long-term and durable solution.
You can also read more about the material at WPC - Wikipedia
